Knives and Knifesmithing

Connect with others who are passionate about knives, and share knowledge and expertise

Members: 64
Latest Activity: Jul 26, 2018

Use this link to see all blog posts that have been tagged with "knives"

Check out Martin Hunters Tips On: Sharpening Stones "To Go" to read about sharpening stones that you can take in the field. There is also a good Ray Mears video about sharpening both in the field and back at basecamp using Japanese Water stones. For more on Japanese water stones, check out the A-Z of bushcraft J for Japanese waterstone video. Here is a great review from Te Hopo of the Lansky Deluxe Sharpening System.

Repairing and Reconditioning
Martin also has a great Tips On: Reconditioning a Bushknife post which has some great info on how to fix a blade and a discussion of different materials.

There is an excellent new article on Dryad Bushcraft called Damascene Knife Making with Lars Enander

Safe Use
Martin's website also has a must read knife safety section on his website. Andrew gives top tips on using the cutting tool skillfully and safely on his K for Knife video

Do you have a tutorial, review, or any post that's knife related? Let the group administrators know and they can include it in this page.

Below are some videos of interest:
How to make a bushcraft knife by A-Z Bushcraft Scott Gossman from Gossman Knives demonstrates how to sharpen a knife

Discussion Forum

Knife Sharpening Block

Started by R.Braun Oct 6, 2015. 0 Replies

Just got a knife sharpening block out of storage and it is coated in this strange. I think it may be oil which has absorbed a load of dust. Has this happened to anyone else?

Knife types you would carry.

Started by Scott Hamilton. Last reply by Mr.J Nov 13, 2012. 4 Replies

I finally tried my Swiss army knife, locking blade model, on my firesteel and it threw good sparks. I have tried other stainless knives on the firesteel and hardly any sparks. So I carry a Frost Mora…Continue

Tags: parang, golok, carry, setup, firesteel

Comment Wall

Add a Comment

You need to be a member of Knives and Knifesmithing to add comments!

Comment by Wing Szeto on December 25, 2013 at 6:59

Hi all, (Merry Christmas by the way), what do you think about using dive knives for Bushcraft/ outdoor/ survival use? I found two dive knives on the Hunting and Fishing website; they both have a normal edge on one side and a serrated edge and hook on the other side, here are the links:

Comment by Jelena Middleton on September 23, 2012 at 10:03

Tried it again, didn't work. Maybe it's time I gave up on the file?

Comment by Rania Marsh on August 26, 2012 at 12:20

I've been trying to upload a couple of knife making PDF's, The Advanced Knifemakers Manual, and The Complete Bladesmith, but as they get posted as a link, they won't come up to be read. How do I post PDF's on this site? Am I able to?

Comment by Jelena Middleton on August 25, 2012 at 15:01

In case anyone was wondering, my fourth attempt at annealing a file didn't work. It came out just as hard before. I have no idea what's going wrong.

Comment by Rania Marsh on August 2, 2012 at 16:03

I have some knifesmithing PDF's I found online that I'd like to upload if I can. Is there any way I can?

Comment by Terry Smith on May 10, 2012 at 16:09

homemade forge video

Comment by Terry Smith on May 10, 2012 at 15:58

Hay take a look at this video and

Comment by Jelena Middleton on April 9, 2012 at 16:17

Thanks for replying, don't worry about the delay, I've come down with some sort of lung infection/whooping cough, so I've had to postpone my next annealing attempt anyway. I'll try it this way, keep your fingers crossed!

Comment by Moba on April 9, 2012 at 15:38

Apologies for the delay in replying, work is seriously cutting into my leisure time! you can elevate the file with a few pieces of scrap metal, but have enough to prevent the file from sagging from heat. keep the fire going for as long as you would an evening heating fire and leave the file in there under the ashes till morning, this worked for me. 

Comment by Jelena Middleton on March 30, 2012 at 21:31

Thanks for replying, just a couple of questions:

What did you use to elevate the file? How long after it went red did you keep the fire going? Any other specifics that could help? Thanks a lot.


Support Us

Shop through this affiliate link portal as we get a small commission:


  • Add Videos
  • View All


  • Add Photos
  • View All

© 2020   Created by Ryan Johnson-Hunt.   Powered by

Badges  |  Report an Issue  |  Terms of Service